Staff assistance call system Wireless assistance call system "TifloVideoCall"

A video call device consists of a call unit with a built-in video camera (external camera) and a broadcast video receiver (internal monitor). It should provide high-quality communication over a dedicated radio channel to a distance of 50 meters.

“TifloVideoCall” can be configured so that it not only provides communication between the dispatcher operator and the disabled person, but also activates the “Available access” system or lifting device.

The advantages of this system:
- Video receiver with a 7-inch color monitor in an anti-vandal case
- Esthetic appearance of the button with the built-in video camera
- Touch button with LED light
-Video camera is equipped with a DVR, with preservation of information on a memory card of no more than 4GB
-Easy installation does not require construction
-Power "TifloVideoVyzova" is provided from a network of 220V.
To ensure uninterrupted operation during a power outage, the device is equipped with a built-in battery with a capacity of 1100 mAh.
The device is attached to the wall with a dowel of nails (call block for three, internal monitor for four), fasteners are included in the device kit.

Specifications:
Monitor - 7 "TFT-LCD
Frequency range - 2.4GHz
Video - VGA at 25 frames per second at 2 Mbps / 3 Mbps / 4 Mbps
Audio - Duplex mode
Communication distance - 50 meters without any interference
Power supply - internal monitor 5V / 2000mA
13.5V / 1500mA external camera
Operating current - 750mA internal monitor
250mA external camera
Operating temperature - -20 ? + 50 ?
Overall dimensions - internal monitor VhShhG 220h185h35 mm.
external camera VhShhG 155h85h35 mm.

! The only requirement is that the external camera must be located at a distance from the floor level accessible to a wheelchair user.